STOCK RUN OUT & SHOWROOM DEMONSTRATOR SALE

CONTACT US WITH YOUR REQUIREMENTS thatcher@hotkey.net.au or Ph 03 9785 3222

DEMO/SHOWROOM R4000S Compact Edge Bander incl. 9030 Dust Collector, hose + fittings

• Hot melt Teflon coated glue pot with temperature stand by 
• User friendly Delta touch screen controller                                                                                                     
• Infeed stop system to prevent boards feeding too close                                                                                  
• Electric rise & fall of top beam for panel thickness                                                           
• Pre heated fence
• 2 Saw end trimming
• Top & bottom radius trimming
• Top & bottom radius scrapers
• Buffing
• 12mt/min feed speed
• Built in dust extraction electrics + insulated hood with lighting
• Dust extraction on cut off saws, trimmers & scrapers connected to a common dust manifold

• NEW PRICE WAS $22,950 +gst     SHOWROOM RUN OUT SALE PRICE $16,250 +gst FOT Seaford
  

NEW RHINO R4000 (RC) Rapid Change Edge Bander

Specification

• Hot Melt Teflon coated glue pot with temperature stand by
• Infrared pre-heating of board
• Delta Touchscreen controller for all functions
• Rapid change 1 touch thick to thin tape change
• 20mt/min max. feed speed (3 speeds)
• Italian HF Motors and Delta 3 Phase Inverters
• Automatic rise & fall of top beam                                                                            
• Built in dust extraction electrics
• Dust manifold to service all working units

Working Units

• Infrared heating                                                                                                                                                  
• Gluing
• Guillotine                                                                                                                                                                                                                   
• Cut off Saws
• Top & bottom trimming
• Top & bottom radius scrapping
• Flat glue scrapers
• White oil spray system prior to buffing                         

NEW RHINO R4000 RC Rapid Change Edge Bander   PRICE P.O.A 

DEMO/SHOWROOM R5000 (RC) Rapid Change Cnr Rnd Edge Bander incl. 240V Compressor

Specification  

• Hot Melt Teflon coated glue pot
• Infrared pre-heating of board
• Delta Touchscreen controller for all functions
• Rapid change 1 touch thick to thin tape change
• 20mt/min max. feed speed (3 speeds)
• Italian HF Motors and Delta 3 Phase Inverters
• Automatic rise & fall of top beam
• Built in dust extraction electrics
• Dust manifold to service all working units

 Working Units

• Infrared heating
• Gluing
• Guillotine                                                                        
• Cut off Saws
• Top & bottom trimming
• 2 Motor Corner Rounding
• Top & bottom radius scrapping
• Flat glue scrapers
• White oil spray system prior to buffing
• Buffing

NEW PRICE WAS $49,950 +gst     DEMO RUN OUT SALE PRICE 1 only @ $29,950 +gst FOT Seaford
                                                        Inspect at our Seaford VIC warehouse

NEW RHINO RD2000 PORTABLE EDGE BANDER

IDEAL FOR CONTOURS, CORNER SHELVING, ON SITE FIX UPS OR SMALL ONE OFF JOBS, INCLUDING;

• Temperature controlled Hot Melt Glue Pot
• Hand held
  
• Contour and straight edging
• 240V Single Phase
• Hand held end trimmer
• Support Table
• 2 x Suction clamp stands

NEW PRICE P.O.A

NEW RELEASE RHINO RJ3200M MANUAL PANEL SAW

Technical Parameters:

Max cutting thickness - 75mm
Max cutting length - 3200mm
Main saw power - 5.5 kw                                                                               
Main saw speed - 4200/5000rpm
Scoring saw power - 0.75 kw
Scoring saw speed - 8000rpm
Main blade size - 300mm
Scoring blade size - 120 x 20mm
Overall dimensions (L x W x H) - 3500 x 4000 x 1600mm

Machine Features:

Manual rise and fall of main & scribe saw
Tilt angle by handwheel with display of angle
Manual adjusting fence
Mita cutting fence
Overhead saw guard
Outrigger fence with 2 end stops

Also available X SHOWROOM RHINO BUSINESS STARTER PACKAGE from $30,950 + gst consisting;

1 x RHINO R4000S COMPACT EDGEBANDER    
1 x RHINO RJ3200M MANUAL Panel Saw                          
2 X RHINO 9030 TWIN BAG DUST COLLECTOR
1 X RHINO 150 Ltr Air Compressor Model RG2080
              

NEW RJZ OPTIMAT AUTO SETTING FENCE PANEL SAWS

RHINO OPTIMAT RJZ3200 SERVO SETTING FENCE PANEL SAW

Specification + Features

• German design heavy duty sliding table
• Max. cutting length 3000mm
• Electric rise, fall + tilt of blade and scribe saw set via overhead controller
• AUTO setting rip fence via overhead touchscreen controller
• Heavy duty Mita fence with clamping 30-135 degrees
• Two precision end stops
• German design dust hoods 1 for straight + 1 for angle cutting
• Incorporating NEW colour touchscreen

PRICE WAS $24,950 +gst    RUN OUT SALE PRICE NOW $18,950 +gst boxed ex Seaford VIC

RHINO OPTIMAT RJZ3800 SERVO SETTING FENCE PANEL SAW

Specification + Features

• German design heavy duty sliding table
• Max. cutting length 3600mm
• Electric rise, fall + tilt of blade and scribe set via overhead controller
• AUTO setting rip fence via overhead touchscreen controller
• Heavy duty Mita fence with clamping 30-135 degrees
• Two precision end stops
• German design dust hoods 1 for straight + 1 for angle cutting
• Incorporating NEW colour touchscreen

PRICE WAS $25,950 +gst   NEW RJZ3800 PANEL SAW P.O.A

NEW RHINO RJ HANDWHEEL SETTING FENCE PANEL SAWS

NEW RHINO RJ3200S HANDWHEEL SETTING FENCE PANEL SAW

• German design heavy duty 405mm sliding table
• Max. cutting length 3000mm
• Electric rise, fall + tilt of blade via electrical control panel
• Electric tilt, manual rise and fall of scribe saw blade
• Ball screw setting fence from handwheel
• Large digital display of fence position
• Fence+blade adjusted from operator control side of machine, no need to walk around to unlock and reposition fence
• Heavy duty Mita fence with clamping 30-135 degrees
• Two precision end stops
• German design dust hoods 1 for straight + 1 for angle cutting

PRICE WAS $21,450 +gst   NEW RJ3200S PANEL SAW P.O.A

NEW RHINO RJ3800S HANDWHEEL SETTING FENCE PANEL SAW

• German design heavy duty 405mm sliding table
• Max. cutting length 3600mm
• Electric rise, fall + tilt of blade via electrical control panel
• Electric tilt, manual rise and fall of scribe saw blade
• Ball screw setting fence from handwheel
• Large digital display of fence position
• Fence+blade adjusted from operator control side of machine, no need to walk around to unlock and reposition fence
• Heavy duty Mita fence with clamping 30-135 degrees
• Two precision end stops
• German design dust hoods 1 for straight + 1 for angle cutting

NEW RHINO RJ3800S Handwheel Setting Fence Panel Saw   PRICE P.O.A 

NEW RHINO COMBINATION MACHINE MODEL RX5400

• 5 x Combination including:
• 2400mm Sliding Table Panel Saw
• Spindle Moulder
• 400mm Wide Planer
• 400mm Wide Thicknesser
• Mortiser
• Thicknesser with 760mm table
• Mortiser with 470 x 280mm table
• Mortiser transverse stroke 150mm / lengthways stroke 120mm / vertical stroke 100mm
• 3 Independent 5kW Motors
• Motor selector switch for Panel Saw, Planer/Thicknesser/Mortiser & Spindle Moulder
• Planer with 1800mm table, 4mm max. product removal per pass

NEW PRICE $16,950 +gst

RHINO R130 SPINDLE MOULDER

• Featuring:
• Working table: 1200 x 730mm
• Spindle rotating speed: 3000-9000r/min
• Spindle diameter: 35mm
• Max. working height: 180mm
• Installed Power: 7.5kW
• Inverter

NEW PRICE $P.O.A +gst

RHINO HYDRAULIC PRESSES

50T & 80T SINGLE DAYLIGHT COLD PRESS

• Featuring:
• Press board dimensions: 3000 x 1300mm (80T 3250 x 1500mm)
• Max. Pressure: 50 Tonne (80T)
• Max. Opening: 1000mm
• Installed power: 4kW
• Qty of cylinders: 4 (80T with 6 cylinders)
• Platen layer: Single
• Rollers in bottom platen: 4 rows
• Automatic + Manual Press Cycle
• 80T RHINO COLD Press Pictured

50T SALE PRICE $25,950 +gst FOT Seaford - IN STOCK

80T HOT SALE PRICE $P.O.A +gst FOT Seaford - IN STOCK

LARGE PLATEN 100T SINGLE DAYLIGHT COLD PRESS

• Featuring:
• Work table dimensions: HUGE 3650 x 1500mm
• Working press: 100 T
• Qty & Dia. of cylinders: 6 
• Layer of platens: Single daylight
• Opening between platens: 1000mm
• Rollers in bottom platen: 5 rows
• Front support rollers for load assist: 2 pieces
• Installed Power 5.5kW
• 
  

  PRICE $P.O.A  +gst FOT Seaford VIC

150T 3650 x 1500mm SINGLE DAYLIGHT HOT PRESS IN STOCK
IDEAL FOR BENCHTOPS, PANELS AND DOORS

• Featuring:
• Worktable dimensions: 3650 x 1500mm
• Working pressure: 150 Tonne
• Qty. & Dia. of cylinders: 100mm x 10 pieces
• Opening of platens: 300mm
• Layer of platens: Single
• Electrical heating power: 2 position selector switch for 72kW or 36kW heating
• Installed power: 7.5 kW
• Mylar covered platens
• Safety light curtain barrier along front face of Press
• Manual + Automatic Press Cycle

• HOT SALE PRICE $P.O.A +gst FOT Seaford VIC

150T 3050 x 1300mm 5 DAYLIGHT HOT PRESS IN STOCK

• Featuring:
• Worktable dimensions: 3050 x 1300mm
• Working pressure: 150 Tonne
• Qty. & Dia. of cylinders: 100mm x 10 pieces
• Opening of platens: 80mm
• Layer of platens: 5
• Electrical heating power: 96kW
• Installed power: 8.5 kW
• Stainless steel covered platens
• Safety light curtain barrier along front face of Press
• Each platen has individual temperature control x 5 Temp controllers
• Manual + Automatic Press Cycle

HOT SALE PRICE $P.O.A + gst FOT Seaford VIC

RHINO HYDRAULIC 16 ROW ROTARY TIMBER CLAMPING PRESS IN STOCK

• Featuring:
• Max. dimensions: 3000 x 1320mm
• Max. working thickness: 80mm
• Max. clamp carrying thickness: 80mm
• No. of clamping rows: 16
• No. of clamping fixtures per row: 8
• No. of hydraulic motor: 2

HOT SALE PRICE $P.O.A +gst FOT Seaford VIC

2 X PAUL 11MKL OPTIMISING DOCKING SAWS AVAILABLE NOW

The 11MKL’s can be purchased together or can be separated and sold individually.
Both available for immediate delivery!! Both lines still installed and can be inspected running North Island New Zealand.



1 x PAUL 11MKL is 2003 YOM                                                                                                      
Maxi 4.0 ControllerFull optimisation                                                                               
Dual Marking Station Infeed  
Pneumatic saw stroke                                                                                             
20.0mt long outfeed belt with 5 ejectors ( This belt can be                                                                               
shortened or more ejectors can be added)                            
Max. infeed timber length 6000mm
Minimum timber section 50 x 19
Maximum timber section 180 x 45 or 100 x 75

1 x PAUL 11MKL is 2005 YOM                
Maxi 5.0 Controller Dual Marking Station Infeed            
Measuring station followed by cutting station with
High speed servo saw stroke
11.5mt long outfeed belt with 6 ejectors
Max. infeed timber length 6000mm 
Minimum timber section 50 x 19                                              
Maximum timber section 180 x 45 or 100 x 75

SECOND HAND PAUL C14_MKL OPTIMISING DOCKING SAW (2009)

Line can be inspected running North Island New Zealand, Available NOV / DEC 2017, PRICE P.O.A 

Maxi 5.0 Controller                                                                          
Dual Marking Station Infeed
High speed servo saw stroke for cutting station                                                                                                                                     
11.5mt long outfeed belt with 5 ejectors                                                                                                    
Max. infeed timber length 6000mmMinimum timber section 50 x 19
Maximum timber section 300 x 60 or 100 x 100

    

CURRENT SPECIALS

• • Second Hand 2017 RHINO EDGE BANDER MODEL R4000 COMPACT SII new was $22,950 NOW $13,950 FOT SEAFORD Inspection welcome!
  • SHOWROOM/DEMO RHINO EDGE BANDER MODEL R5000 (RC) Rapid Change was $44,950 NOW $29,950 FOT SEAFORD
  • SHOWROOM/DEMO RHINO SPINDLE MOULDER SALE PRICE was $9,950 NOW sale price $P.O.A
  • NEW RUN OUT SALE RHINO EDGE BANDER MODEL R4000 COMPACT SERIES II was $22,950, NOW $18,950 FOT SEAFORD
  • NEW RUN OUT SALE RHINO EDGE BANDER MODEL R5000 (RC) Rapid change was $44,950, NOW P.O.A
  • NEW RUN OUT SALE RHINO EDGE BANDER MODEL R4000 (RC) Rapid Change was $28,950, NOW P.O.A
  • NEW RUN OUT SALE RHINO HAND HELD PORTABLE CONTOUR OR STRAIGHT EDGE BANDER 240V Single Phase sale price $P.O.A
  • NEW SERIES RHINO PANEL SAW OPTIMAT RM3200, Electric rise & fall of saw blade & scribe saw manual handwheel tilting of saw blade with digital display $P.O.A FOT SEAFORD. Ask about our starter package deal with this PANEL SAW & EDGE BANDER.
  • NEW RUN OUT SALE RHINO PANEL SAW MODEL RJZ3200 AUTOMATIC SETTING FENCE sale price was $24,950 NOW $18,950 FOT SEAFORD
  • NEW RUN OUT SALE RHINO PANEL SAW MODEL RJZ3800 AUTOMATIC SETTING FENCE sale price $P.O.A
  • NEW RUN OUT SALE RHINO PANEL SAW MODEL RJ3200S HANDWHEEL SETTING FENCE sale price $P.O.A
  • NEW RUN OUT SALE RHINO PANEL SAW MODEL RJ3800S HANDWHEEL SETTING FENCE sale price $P.O.A
  • NEW RHINO COMBINATION MACHINE 5 UNITS featuring 2400mm sliding table panel saw, spindle moulder, planer, thicknesses and router sale price $P.O.A
  • NEW RUN OUT SALE RHINO 9030 2 BAG DUST COLLECTOR was $1,295 NOW $795 FOT SEAFORD
  • NEW RUN OUT SALE RHINO 9075 4 BAG DUST COLLECTOR SALE PRICE was $4,950 NOW $3,950 FOT SEAFORD
  • NEW RUN OUT SALE RHINO 50T HYDRAULIC COLD PRESS 3000*1300 sale price $25,950 FOT Seaford VIC
  • NEW RUN OUT SALE RHINO 80T HYDRAULIC COLD PRESS 3250*1500 sale price $P.O.A IN STOCK NOW
  • NEW RUN OUT SALE RHINO 100T HYDRAULIC COLD PRESS 3650*1500 sale price P.O.A IN STOCK NOW
  • NEW RUN OUT SALE RHINO 150T SINGLE DAYLIGHT HYDRAULIC HOT PRESS 3800*1300*300MM Opening SALE PRICE $P.O.A IN STOCK NOW
  • NEW RUN OUT SALE RHINO 150T 4 DAYLIGHT HOT PRESS 3000*1300*100MM Opening SALE PRICE $P.O.A IN STOCK NOW
  • NEW RUN OUT SALE RHINO ROTARY HYDRAULIC CLAMP PRESS SALE PRICE $P.O.A
  • NEW RUN OUT SALE RHINO 1300MM GLUE SPREADER PRICE $P.O.A-
  • NEW RUN OUT SALE RHINO 1600MM GLUE SPREADER PRICE $P.O.A-
  • NEW RUN OUT SALE RHINO 2T SCISSOR LIFTER 2400 X 1000MM sale price $8,950-
  • NEW RUN OUT SALE RHINO 2Hp 50 Ltr Tank Air Compressor, 240V PRICE $795-                                      
  • NEW RUN OUT SALE RHINO 5.5Hp 150 Ltr Tank Air Compressor, 415V PRICE $2,950-
  •                                      

   

•  All prices plus GST                 

• Enquire today for specifications, photos, terms and conditions. 

   

• CONTACT US WITH YOUR REQUIREMENTS thatcher@hotkey.net.au or Ph 03 9785 3222

 Download latest Newsletter